Direct View LED Display支持服务

Can ViewSonic projector remote control work on DVLED Displays?

Answer: Yes. The remote controls that operate a ViewSonic projector will also work on a DVLED Display.

How do I calibrate overall brightness on my DVLED Display?

After replacement of a particular LED module, brightness may be slightly different than that of other modules. At this point, manual calibration is required. In order to troubleshoot this problem, the following procedure can be followed: Solution Step 1: Use the USB B-to-A cable to connect the display to the computer. Step 2: A...

What is the Bracket installation order of the DVLED Floor Stand configuration?

The Bracket installation order varies from the Wall-mount configuration. Please follow the steps in the respective order for the Floor Stand configuration: Bottom cross beam installed to the left and right supports. Top cross beam installed to the left and right supports. Original mounting bracket removed from the top and reattached to the ...

What is the Bracket installation order of the DVLED Wall-mount configuration?

The Bracket installation order varies from the Floor Stand configuration. Please follow the steps in the respective order for the Wall-mount configuration: Appropriate location and center point found for installation (e.g. upper bracket mounted at least two meters above the ground for a 135" LED display; for other display sizes, check corresp...

How do I install a DVLED display with a Floor Stand configuration?

Please refer to this link before beginning any Direct View LED Display installs. Solution Step 1: Install the Floor Stand Step 2: Install the System Control Box onto the Floor Stand Step 3: Install the Cabinets onto the Floor Stand, connect the System Control Box to the Cabinets Step 4: Install the LED Modules onto the Cabin...

How do I install a DVLED display with a Wall-mount configuration?

Please refer to this link before beginning any Direct View LED Display installs. Solution Step 1: Install the Wall-mount brackets Step 2: Install the Cabinets onto the Floor Stand, connect the System Control Box to the Cabinets Step 3: Install the System Control Box onto the Floor Stand Step 4: Install the LED Modules onto t...

Why is the power supply and other equipment work, but the DVLED Display is not displaying image?

Answer: If the LED display does not work, but the power supply and other equipment checks are working, it may be caused by a firmware conflict. Please perform mandatory firmware update under this circumstance.

How do I perform a mandatory firmware update for my DVLED Display?

Solution Step 1: Please contact customer service staff to obtain the mandatory firmware update file(s) Step 2: Copy the files to the outermost directory of the USB Step 3: Turn off the power of the LED display and plug in the USB Step 4: Press the power button to turn on the display, and immediately press the Menu butto...

How can I operate my DVLED Display?

The Direct View LED Display can be operated by either: 1) the Remote, 2) the Keyboard, 3) or RS232 For further details, please refer to this link and select the appropriate model to view the respective User Guide.

What does pressing "Blank" do on a DVLED Display, and how does it differ from "Standby mode"?

Answer: Blank can quickly switch between a black screen and the input screen. This feature simply displays a blank screen and does not turn off the system controls. Similarly, "Hibernate" Standby mode powers off the screen only but still has minor power utilization for temporary memory purposes. In complete contrast, "Sleep" Standby mode po...