Commercial DisplayPodpora - ViewSonic Czech Republic

How to customize an Android Boot Animation on CDExx10 series and CDM models?

1. Overview The "Android Boot Animation" is a script used to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip. 2. Inside the bootanimation.zip file The bootanimation.zip file contains: The image folder(s) (containing PNG images named by incremental numbers) The desc...

Does my e-Poster Support Power Point presentations?

ViewSonic e-Posters do not support Power Point presentations natively. There are 3 ways to achieve this purpose. 1.Use vSignage: Models like EP4320/EP5520/EP5520T/EP5540/EP5540T have built in the vSignage. You are able to use the power point widget to publish your power point file from the computer to the e-Posters. 2. Connect a...

What are the requirements or limitation on the using cables of Videowall?

Support HDMI Ver. 1.4b DVI cable can't exceed 5M, otherwise, a DVI extender is required HDMI cable can't exceed 5M, otherwise, a HDMI extender is required LAN Cable can't be used to carry video signal directly Signal cable for each display should be separated from each other, twists cables together is not allowed Device for signal transmi...

How to disable the internal speaker and output volume from the line out for CDE5510, CDE6510, CDE5010?

You can set the volume to 0 (to disable internal speaker volume) and set the Audio out (Line out) volume. The volume of the Audio out (Line out) is suggested to control by an external sound bar for higher output.

How to update F/W on EP3220/4320/5520?

Upgrade under the factory menu Copy MstarUpgrade.bin in USB and Insert U disk to the USB port Press Input menu and then press 2 5 8 0 to activate factory menu (Fig. 1) Move to “Upgrade Main” item and press OK button to confirm. (Fig. 2) Select “Confirm” to confirm the upgrade (Fig. 3), the system will automatically reboot and start the up...

How to check CDX series , videowall, model RS232 daisy chain working correctly

1. Is it correct of RS232 daisy chain cable ? 2. In OSD menu, General settings -> Eco mode please set to Normal. (If set to Low power standby, the unit can power OFF but can’t power ON) 3. The RS232 daisy chain cable is 2.4mm – 2.4mm

How can I fix EP5520T into floor?

Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005

How can I add other widgets to the Signage manager software?

You can refer below steps to use other widgets.

Which network ports should be opened for Signage Manager and media players?

To ensure Signage Manager can discover and control players over a Local Area Network (LAN), please ensure that TCP 80, 8080, 443, and UDP 1900 are opened in your firewall settings. Port Configuration Table: Port TCP UDP Description 80 TCP Hypertext Transfer Protocol (HTTP), main communication port with legacy play...

How to prevent image quality loss when exporting from Signage Manager?

While editing content with Signage Manager, it will compress and save photo in lower quality. Please follow below procedures to replace the photo. 1. After finishing editing in Signage Manager, choosing “Export to USB”. 2. Open “File Explorer” and locate USB drive in SMIL/media folder. 3. Copy original photos to this folder and...