Skip to main content

How can I replace the IFP50 series’ boot up image and animation?

Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

How to do when the message on my IFP5550/IFP6550/IFP7550/IFP8650, "The device has been locked, please use the U disk to unlock"?

1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer below steps to unlock: 1. Prepare a FAT32 formatted USB drive. 2. Unzip Unlock.zip attached and copy to the USB drive root directory. 3. Insert the USB to I...

Can IFP7550 HDMI out show the annotation layer to second display?

Yes, the HDMI out on the IFP7550 will show the annotations on the second display.

How to make sound output from external speaker bypass integrated speaker in IFP30/50 series?

Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.

How do I disable the Android OS in IFP?

Please follow below instructions to disable the Embedded Player(Android OS).   Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Go to “Player Settings"-> "Embd Player" and turn it to OFF by using the direction button on remote control, choose OK button when prompt confirm messag...

What is the resolution of IFP7550 OSD menu?

The resolution of IFP7550 OSD menu is 1080P.

How do I remote control IFP5550/6550/7550/8650-1 (Gen. 1) power on/off via SureMDM?

Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1)  ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643

What the max. external HDD capacity can be supported for IFP7550?

IFP7550 USB port 3.0 supports external HDD up to 4TB. Below models had pass the read/write test. WD: WDBUY0040BBK(4TB) SEAGATS: STDR2000301(2TB) TOSHIBA: HDTC810YR3AA(1TB) SONY: HD-E1(1TB)

How to avoid unauthorized cast-in via Airplay?

To disable Airplay Service in vCast do the following：   Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service   To enable Airplay follow steps 1-3 and check Airplay Service

ViewBoard Podpora

General Questions Interactive Display Technical Documents

Kontaktujte nás

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.