This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.
1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly 3. If you connect from PC, please make sure the com port is correctly chosen. 4. It's recommended to vController to control the Viewboard by RS232. Please r...
Please manually set Date/Time to select correct time zone.
1.Please turn on player’s HDMI CEC function. 2.Connect IFP and player in HDMI cable. 3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP. When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is turned on. <Note> Not all HDMI ports on IFP suppo...
It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.
Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.
1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer below steps to unlock: 1. Prepare a FAT32 formatted USB drive. 2. Unzip Unlock.zip attached and copy to the USB drive root directory. 3. Insert the USB to I...
Yes, the HDMI out on the IFP7550 will show the annotations on the second display.
Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.