To obtain better image quality, please set the resolution at least at 1920x1080.
You may control IFP7550 by Hercules software. Please have "HEX" checkbox unchecked and key in ASCII command with <CR> at the end.
Yes. Install the vCastSender Chrome Extension from the Chrome Web Store to wirelessly cast your screen to the ViewBoard. Steps: Install Extension: Open the Chrome browser, go to the Chrome Web Store, and search for and install the [vCastSender] extension. Network Connection: Ensure both your Chromebook and ViewBoard are connected to t...
Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.
You can set color temperature to Cold or drag the dot to right to adjust in Display setting. Please note when you set color temperature to Cold or drag the dot to right to adjust, the blue light also increase.
If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then power button can ...
To disable Airplay Service in vCast do the following： Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service To enable Airplay follow steps 1-3 and check Airplay Service
Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.
Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...
Contact Us