ViewBoardSupport - ViewSonic Israel

Unable to wake up Intel NUC when connected to an IFP50-2 series display

If you are experiencing difficulty waking up your Intel NUC computer while it is connected to the IFP50-2, please follow the steps below. Requirements: ● IFP50-2 Series Display ● Intel NUC (10th Gen) ● Intel NUC: Aptio V BIOS (Models after 2019) Instructions: 1. Power on the Intel NUC and tap F2 upon the boot splash screen. ...

What can I do if the Viewboard is lagging?

We suggest refer to one of below cleaning methods. 1. Use the Side Tool Bar to clean all current processes. 2. Use vSweeper to clear memory and unwanted files. 3. Power off the Viewboard, then power it back on to clear all unnecessary data and close any running procedures. Note: Using Browser/Chromium to play 1080...

How can I modify NMP711 slot-in PC serial number in BIOS？

There is no tool to modify serial number in BIOS for NMP711.

How do I disable the Android OS in IFP?

Please follow below instructions to disable the Embedded Player(Android OS). Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Go to “Player Settings"-> "Embd Player" and turn it to OFF by using the direction button on remote control, choose OK button when prompt confirm messag...

Can I use my Chromebook to cast to the ViewBoard screen?

Yes. Install the vCastSender Chrome Extension from the Chrome Web Store to wirelessly cast your screen to the ViewBoard. Steps: Install Extension: Open the Chrome browser, go to the Chrome Web Store, and search for and install the [vCastSender] extension. Network Connection: Ensure both your Chromebook and ViewBoard are connected to t...

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF: When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed. With this connection, both built-in and external speakers will output audio. You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function. 2.Connect IFP and player in HDMI cable. 3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP. When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is turned on. <Note> Not all HDMI ports on IFP suppo...

What to do when the touch function has no response on the ViewBoard?

If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...

Why is there a lag or slow touch response on the ViewBoard?

Touch lag on the native Android system is often caused by high RAM usage. Clearing background apps or using the built-in cleaning tool can restore responsiveness. Steps: One-Tap Memory Clear: Tap the [Sidebar Menu] on either side of the screen. Select the [Task Manager / Recent Apps] icon. Tap [Clear All] to release background ...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...