Skip to main content

Why my MacBook with MacOS v10.11 can't get touch feedback from IFP7550?

It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.

What to do as it shows a warning message “Program not activated, will exit in 30 minutes” when running vBoard?

vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input.   Supported input sources:   1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

How can I lock the menu and input function on IFP5550/IFP 6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the menu and inpu...

What to do when: "Machine Code: 667406643860" shows up on my Viewboard after a reset?

This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

Where do I find IFP50/30/70 series touch driver for Mac?

Please download the touch driver for Mac in below link or visit the product page on our website.    IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download

Why is there a lag or slow touch response on the ViewBoard?

Touch lag on the native Android system is often caused by high RAM usage. Clearing background apps or using the built-in cleaning tool can restore responsiveness. Steps: One-Tap Memory Clear: Tap the [Sidebar Menu] on either side of the screen. Select the [Task Manager / Recent Apps] icon. Tap [Clear All] to release background ...

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP.  When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is  turned on. <Note> Not all HDMI ports on IFP suppo...

ViewBoard Support

General Questions Interactive Display Technical Documents

General InquiriesContact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.