ViewBoardSupport - ViewSonic Luxembourg

Unable to wake up Intel NUC when connected to an IFP50-2 series display

If you are experiencing difficulty waking up your Intel NUC computer while it is connected to the IFP50-2, please follow the steps below. Requirements: ● IFP50-2 Series Display ● Intel NUC (10th Gen) ● Intel NUC: Aptio V BIOS (Models after 2019) Instructions: 1. Power on the Intel NUC and tap F2 upon the boot splash screen. ...

How can I modify NMP711 slot-in PC serial number in BIOS？

There is no tool to modify serial number in BIOS for NMP711.

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly 3. If you connect from PC, please make sure the com port is correctly chosen. 4. It's recommended to vController to control the Viewboard by RS232. Please r...

Why is there a lag or slow touch response on the ViewBoard?

Touch lag on the native Android system is often caused by high RAM usage. Clearing background apps or using the built-in cleaning tool can restore responsiveness. Steps: One-Tap Memory Clear: Tap the [Sidebar Menu] on either side of the screen. Select the [Task Manager / Recent Apps] icon. Tap [Clear All] to release background ...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

What USB WiFi dongle/adapter is supported on IFP series?

See below the list of compatibale Wifi dongles for the IFP series. Models Supported Wi-Fi dongle IFP4320 VSB050 LB-WIFI-001 IFP30 VSB050 LB-WIFI-001 IFP32 / IFP32-2 VSB050 VB-WIFI-002 VB-WIFI-004 TP Link TL-WN725N IFP33 VSB050 VB-WIFI-...

Why does my IFP HDMI OUT only display the onboard Android system and not the input source I am currently connecting to the IFP?

Issue: When I connect an HDMI input source to my IFP and then connect an external monitor via HDMI out, the external monitor only displays the IFP's Android interface instead of the HDMI input source. Solution: To resolve this issue, follow these steps: Using your IFP's remote control, press the Input button and then press 991 to acc...

IFP105S - Why Is My OPS showing no Signal After the Firmware Update?

IFP105S - No signal With the latest firmware version 20240429, the OPS EDID is set to 5K by default. This setting may cause a "No Signal" issue after the firmware update when using the VPC25 or other OPS. To resolve this issue, we have added a switch in the Android settings that allows the EDID to be set to 4K to solve the No signal....

What should I do when there is no signal on the ViewBoard when connecting a long HDMI cable?

ps. This article is applied to IFP6552-1A/1B, IFP7552-1A/1B and IFP8652-1A/1B Please replace HDMI premium certificated cable. If still have problem, please follow below instructions to adjust settings on the Debug menu for better compatibility. 1. Update firmware to the latest version (20221201 or later). 2. Enter Debug Menu by p...

What to do if VPC15-WP-3 can not find Wi-Fi 6 (802.11ax) wireless routers and access points in Windows?

Applied model: VPC10/12/14/15/16/17 running Windows Please update to the latest Wi-Fi driver on VPC. For more information, please refer to this article.