Direct View LED DisplaySupport - ViewSonic Middle East

Can we use display grouping function on 2nd gen LDM & LDC ?

Yes. Please make sure you follow the below steps. Turn off Wireless hotspot on LDM/LDC. (Settings --> Network --> Wireless hotspot --> Disable) Use Mouse to select the display in vCast under Display group settings --> Device list

How much is the power output of LDS138-151's power socket (PC socket) on the back of the display ?

Max power output is 85Kw

What is a Receiving Card on a DVLED Display?

Answer: The Receiving Card (aka Receiving Board) plays a part in supplementing LED Module signal connection. It is directly connected to the Transfer Board as shown in Diagram 1 below. Diagram 1: Receiving Card mounted onto Transfer Card Signal is taken from the Transfer Board and sent to the Receiving Card, thus distributing th...

How does the signal get transmitted across components on a DVLED Display?

Solution The signal will be sent from the “Main Board” and transmitted in three ways: 1) The first path is from the “Audio Board” to the “Speaker” 2) The second path is to the “RS232 Module” 3) The third path is from the “Transfer Board” to the “Receiving Board,” and from the “Receiving Board” to the “LED Module.” ...

How does the current get transmitted across components on a DVLED Display?

Solution When the display is operating, the current is transmitted in three ways: 1) From the “Power Board for Audio Board” to the “Audio Board” 2) From the “Power Board for Main Board” to the “Main Board” 3) From the “Control Board of Power” to the “Relay,” from the “Relay” to the “Power Board for LED module,” from the “Powe...

What is a "hard calibration" for DVLED Displays?

Answer: "Hard calibration" is a form of hardware calibration that fine tunes the color and brightness for specific LED modules on the DVLED Display. Situations in which hard calibration may be required: LED Module position is changed or LED Module is replaced with a spare, LED Modules from a different color batch need to be used, LED M...

What are the Product dimensions and weight for dvLED displays?

Refer to the tables below for dimensions and weight by dvLED product. LD108-121 Width Height Distance Weight w/o wall mount 95.31” (2420.8mm) 57.81” (1468.45mm) 1.38” (35mm) 194.01 lb (88 kg) With wall mount 95.31” (2420.8mm) 57.81” (1468.45mm) 2.2” (56mm) 209.44 lb (95kg) LD135...

What are the DVLED installation conditions of the environment?

Product installation conditions: 1. Installed in a well-ventilated area, indoors. 2. Ideal ambient room temperature at 22℃±10℃, with an ideal relative humidity of 25% to 75% without condensation. 3. Installation location is more than three meters away from air conditioning. 4. Installation location is away from heat sources (e.g. radiators...

What are the Flight Case dimensions and weight for my dvLED Display?

Flight case dimensions and weight will vary by model. Please refer to the table below for Flight Case dimensions and weight by dvLED product: LD108-121 LD135-151 LD163-181 LD216-251 Dimensions (W x D x H) 58” x 27” x 34” (1470 x 850 x 680 mm) 71” x 30” x 34” (1800 x 850 x 745 mm) 83” x 32” x 34” (2100 x 850 x ...

What is a "Customer Maintenance Notice" for dvLED displays?

Answer: The Customer Maintenance Notice is a document that should be explained to the customer on-site, immediately after dvLED installation (during or after software setup). The document contains crucial information regarding proper usage and maintenance critical to effectively extending the life cycle of the product. Note: Full documen...