Commercial DisplaySupport - ViewSonic Mauritius

EP5520/EP5520T vSignage cut-in S/N

Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001

Does my e-Poster Support Power Point presentations?

ViewSonic e-Posters do not support Power Point presentations natively. There are 3 ways to achieve this purpose. 1.Use vSignage: Models like EP4320/EP5520/EP5520T/EP5540/EP5540T have built in the vSignage. You are able to use the power point widget to publish your power point file from the computer to the e-Posters. 2. Connect a...

CDX5560 / CDX5562 Video Wall Installation Addendum

To avoid screen damage, always handle the display by the back handles. Always place the display on a cushion pad after removal from the carton box. Please do not remove the rubber cushions around the display for a video wall installation. You may remove the rubber cushions around the display for a single screen installation.

What is tilling mode for Videowall and how to set it correctly?

<Tiling Mode> In Tile Mode you can view an image in a larger scale by connecting multiple monitors. After all the displays are installed properly to a video wall, you need set the position of each display to determine how to display the input image. Once the position is set, the video source (e.g. computer) identifies the number of connect...

What are the communication settings to control IFP via RS232 and LAN commands?

RS232 Communication Setting - Baud Rate Select: 9600bps (fixed) - Data bits: 8 bits (fixed) - Parity: None (fixed) - Stop Bits: 1(fixed) LAN Communication Setting - Type: Ethernet - Protocol: TCP/IP - Port: 5000 (fixed) - Cross subnet: No - Logon Credentials: No

What is iframe and why CMS software, Signage Manager and vSignage couldn't an inline frame?

Definition and Usage The <iframe> tag specifies an inline frame. Example An inline frame is marked up as follows: <iframe src="https://www.w3schools.com"></iframe> An inline frame is used to embed another document within the current HTML document. Browser Support Why Signage Manager and vSignage couldn't an inline fra...

Why I didn't see my contents displayed on the screen, when I publish the campaign from vSignage or Signage Manager?

Please make sure you following the steps. a. The windows admin of vSignage or Signage Manager and CDM displays or Eposters are in same LAN network . For example, first three groups of IP address are same . 192.168.1.xxx. b. You can use DOS commend "ping" to reach the display's IP address and frames have no loss. For example : c...

How to customize an Android Boot Animation on CDExx10 series and CDM models?

1. Overview The "Android Boot Animation" is a script used to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip. 2. Inside the bootanimation.zip file The bootanimation.zip file contains: The image folder(s) (containing PNG images named by incremental numbers) The desc...

ViewSonic CDE30 Series Power Save Modes: Which Mode Should I Use?

ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...

Which network ports should be opened for Signage Manager and media players?

To ensure Signage Manager can discover and control players over a Local Area Network (LAN), please ensure that TCP 80, 8080, 443, and UDP 1900 are opened in your firewall settings. Port Configuration Table: Port TCP UDP Description 80 TCP Hypertext Transfer Protocol (HTTP), main communication port with legacy play...