Skip to main content

What should I do when there is no signal on the ViewBoard when connecting a long HDMI cable?

ps. This article is applied to IFP6552-1A/1B, IFP7552-1A/1B and IFP8652-1A/1B Please replace HDMI premium certificated cable. If still have problem, please follow below instructions to adjust settings on the Debug menu for better compatibility. 1.    Update firmware to the latest version (20221201 or later). 2.    Enter Debug Menu by p...

What USB WiFi dongle/adapter is supported on IFP series?

See below the list of compatibale Wifi dongles for the IFP series. Models Supported   Wi-Fi dongle IFP4320 VSB050 LB-WIFI-001  IFP30 VSB050 LB-WIFI-001 IFP32 / IFP32-2 VSB050 VB-WIFI-002 VB-WIFI-004 TP Link     TL-WN725N IFP33 VSB050 VB-WIFI-...

IFP105S - Why Is My OPS showing no Signal After the Firmware Update?

IFP105S - No signal With the latest firmware version 20240429, the OPS EDID is set to 5K by default.  This setting may cause a "No Signal" issue after the firmware update when using the VPC25 or other OPS. To resolve this issue, we have added a switch in the Android settings that allows the EDID to be set to 4K to solve the No signal....

Why does my IFP HDMI OUT only display the onboard Android system and not the input source I am currently connecting to the IFP?

Issue: When I connect an HDMI input source to my IFP and then connect an external monitor via HDMI out, the external monitor only displays the IFP's Android interface instead of the HDMI input source. Solution: To resolve this issue, follow these steps: Using your IFP's remote control, press the Input button and then press 991 to acc...

What model can be installed to VB-STND-003?

VB-STND-003 supports ViewSonic display up to 75" .

What is the colour temperature value in Kelvin for IFP7550 and IFP7560?

IFP7550 and IFP7560 color value shown below. Cold: 11000±500 K Standard:   9300±500 K Warm:   7500±500 K Blue light  filter: 4500~11000 K

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

How to wake up IFP7560 from Sleep mode when connected to notebook?

There are some suggestions:   1.If IFP is under Sleep mode, please re-plug HDMI cable.   2.If IFP is on, turn windows to Hibernation (S4) mode, then IFP to Sleep mode. Wake up notebook then IFP will be awaken.

How to activate the preinstalled Windows 10 trial in VPC10/VPC14?

1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activation > Change the product key”, then enter the new product key then click Next to Activate.

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...

ViewBoard Support

General Questions Interactive Display Technical Documents

General InquiriesContact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.